| Inlet Connection: |
3″ ANSI Class 150 Flat Face Flange |
| Discharge Connection: |
2″ ANSI Class 150 Flat Face Flange |
| Operating Speed Range: |
600 RPM – 1465 RPM |
| Maximum Allowable Working Pressure: |
200 psig (1379 kPag) |
| Casing Hydrostatic Test Pressure: |
Minimum of 1.5X MAWP |
| Maximum Allowable Operating Temp: |
350 °F (177 °C) |
| Shaft Seal: |
Single face or double opposed |
| Bearings: |
Custom designed, heavy duty roller bearin |
| Lubrication: |
Once through oil injection – 7 points (lubrication system provided by others) |
| Drive Type: |
Direct couple or belt drive, suitable for VFD |
| Shaft End: |
Ø 1.875 inches (47.62 mm) at coupling |
| Vibration: |
Typical vertical or horizontal overall vibration velocity amplitude is approximately 0.4 in./sec. peak |
| Approximate Compressor Weight: |
495 lbs. (225 kg) |
